• Multifunction monitoring relays MRM

    MRM11
    MRM11 | Multifunctional monitoring relay (1 phase), 1 pole
    - Changeover contact
    - Contact material AgNi
    - Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
    - For installation in electrical distributor
    - Monitoring: U, I, f, P, S, Cos ϕ
    Brochure
    Datasheet

    Control relay

    DIN rail mounting
    Für Verteilereinbau

    CO: 1
    Rated current AC-1: 6 A
    Rated current DC-1: 6 A
    Rated voltage AC: 250 V
    Rated voltage DC: 30 V
    Minimum current: 10 mA
    Minimum voltage: 10 V

    1 phase
    Voltage monitoring AC
    Current monitoring AC
    Voltage monitoring DC
    Current monitoring DC
    Phase loss monitoring
    Phase sequence monitoring
    Phase angle monitoring
    Frequency monitoring
    Active power monitoring
    For electrical distributor
    Treshold exceeded (over)
    Theshold undershot (under)
    Window function (inside)
    Window function (outside)
    Alarm on-delay
    Alarm off-delay
    Threshold selectable

  • MRM32
    MRM32 | Multifunctional monitoring relay (3 phases), 2 pole
    - Changeover contacts
    - Contact material AgNi
    - Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
    - For installation in electrical distributor
    - Monitoring: U, I, f, P, S, Cos ϕ, Δϕ
    Brochure
    Datasheet

    Control relay

    DIN rail mounting
    Für Verteilereinbau

    CO: 2
    Rated current AC-1: 6 A
    Rated current DC-1: 6 A
    Rated voltage AC: 250 V
    Rated voltage DC: 30 V
    Minimum current: 10 mA
    Minimum voltage: 10 V

    3 phase
    Voltage monitoring AC
    Current monitoring AC
    Voltage monitoring DC
    Current monitoring DC
    Phase loss monitoring
    Phase sequence monitoring
    Phase angle monitoring
    Frequency monitoring
    Active power monitoring
    For electrical distributor
    Treshold exceeded (over)
    Theshold undershot (under)
    Window function (inside)
    Window function (outside)
    Alarm on-delay
    Alarm off-delay
    Threshold selectable