- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ
- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ
- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ
- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ
- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ
- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ
- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ
- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ
Voltage, current, frequency, active power, apparent power, cos Phi, Delta Phi (phase sequence)
The device data sheet and the package insert contain a description of the menu navigation, etc.
Press both arrow keys simultaneously to access the menu. When you enter the settings, you will be guided through the menu automatically.
To measure currents greater than 5A, current transformers are required that are specified for 5A on the secondary side. This allows high currents to be measured, but the scaling factor must then be adjusted in the settings.
