Monitoring & Measuring Devices

CEM01/UC24-240V

Interference suppression module

CT515R/DC36V

- DC current monitor 0-2 A
- For plug-in socket S3-M0, S3-M0R, S5-M, S5-MR
- Monitoring: overcurrent and undercurrent

CT524R/DC24V

- DC voltage monitor 0-30 V
- For plug-in socket S3-M0, S3-M0R, S5-M, S5-MR
- Monitoring: overvoltage and undervoltage

ESU-D2.C2354/UC24-48V

- 2 changeover contacts (alarms)
- Contact material AgNi
- Alarm delay 0.1...10 sec
- Earth fault resistance measurement 4...30 kOhm

FS-23

- Compatible with: SSU31, SSU33L, TSR19

FZ-23

- Compatible with: SSU31, SSU33L, TSR19

MRM11/UC110-240V

- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ

MRM11/UC12-48V

- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ

MRM11R/UC110-240V

- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ

MRM11R/UC12-48V

- 1 Changeover contact
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ

MRM32/UC110-240V

- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ

MRM32/UC12-48V

- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ

MRM32R/UC110-240V

- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ

MRM32R/UC12-48V

- 2 Changeover contacts
- Contact material AgNi
- Measuring range 0.1-480 V AC / 0.1-690 V DC / 0.1-5 A
- For installation in electrical distributor
- Monitoring: U, I, f, P, S, Cos ϕ, Δϕ

MRS13R/UC12-48V

- 1 NC & 1 NO contact, positively driven- Contact material AgCuNi + Au- Measuring range: ± 5 A- Suitable for railway applications- Monitoring: overcurrent, short circuit

SSU31/AC400V

- 1 changeover contact
- Contact material AgNi
- Pluggable
- Monitoring: phase sequence, phase failure, undervoltage

SSU33L/AC230V 50HZ

- 1 changeover contact
- Contact material AgNi
- Pluggable
- Monitoring: phase sequence, phase failure, undervoltage, overvoltage, frequency

SSU33L/AC400V 50HZ

- 1 changeover contact
- Contact material AgNi
- Pluggable
- Monitoring: phase sequence, phase failure, undervoltage, overvoltage, frequency

SSU33R/AC400V 50 HZ

- 1 changeover contact
- Contact material AgNi
- Pluggable
- Monitoring: phase sequence, phase failure, undervoltage, overvoltage, frequency

SSU34/AC400V 50HZ

- 2 changeover contacts (Alarm & OK)
- Contact material AgNi
- Pluggable
- Monitoring: phase sequence, phase failure, undervoltage, overvoltage, frequency

TSR19/AC230V

- 2 changeover contacts (Alarm & OK)
- Contact material AgNi
- PTC sensor or thermo switch
- Measuring range sensor resistance 100-1800

TSR19/UC24-48V

- 2 changeover contacts (Alarm & OK)
- Contact material AgNi
- PTC sensor or thermo switch
- Measuring range sensor resistance 100-1800