CINT-53/AC230V
| Current type | AC (50 Hz) |
|---|---|
| Nominal voltage | 230 V |
| Operating voltage range | 0.7 UN … 1.25 UN |
|---|---|
| Pick-up voltage | ≤ 0.7 UN |
| Power consumption AC / DC | 0.75 VA / 0.5 W |
| Release voltage | ≥ 0.1 UN |
| Variant | Screw terminal |
|---|
| Conductor cross section cage clamp | 0.5 … 2.5 mm2 |
|---|---|
| Conductor cross section screw terminal | 2.5 mm2 |
| Housing material | PA |
| Ingress Protection | IP 20 |
| Mounting | TH35 (EN 60715) |
| Operation temperature | -20 … 55 °C |
| Pick-up time / bounce time | 5 ms / ≤ 8 ms |
| Release time / bounce time | 10 ms / ≤ 6 ms |
| Storage temperature (no ice) | -40 … 85 °C |
| Weight | 63 g |
| Overvoltage category | III |
|---|---|
| Pollution degree | 3 |
| Test voltage contact / coil | 4 kV / 1 min |
| Test voltage open contact | 1 kV / 1 min |
| Contact materials | AgNi |
|---|---|
| Electrical endurance at rated load AC-1 (cycles) | ≥ 80 000 |
| Inrush current | 15 A, 20 ms |
| Maximum contact load AC | 8 A / 250 V AC-1 |
| Maximum contact load DC | 8 A / 30 V DC-1 |
| Mechanical endurance (cycles) | ≥ 10 000 000 |
| Rated current | 8 A |
| Rated load AC | 2 000 VA |
| Recommended minimum contact load | 10 mA / 24 V |
| Approvals | UKCA,CE,EAC |
|---|---|
| Standards | IEC/EN 61810-1 |
Approvals
3D-models "CINT-53/AC230V"
Documents "CINT-53/AC230V"
